What material is the silicone electric hotline composed of? Silicone electric hotline generally has 2 materials, one is: silicone rubber, soft characteristics are better, and there is: Teflon material (that is, polyfluorotetrabutadiene), Teflon material is more hard, silicone rubber material can be used to communicate AC rated current 500 volts and the following household appliances route installation connection, widely used in electric water heaters, car paint rooms, lighting fixtures lighting and electrical products on goods.
Silicone electric hotline picture
First, the performance characteristics of silicone electric hotline
1. The suitable operating temperature of the silicone electric hot wire is -60°-200°, the working standard voltage is 300/500V, the metal conductor material is electroplated tinned copper core wire, the conductor and insulator are silicone, and the hand-woven layer is glass fiber + silicone resin. Silica gel electric hot wire has the characteristics of good acid suppression, anti-alkali sealing primer, antifungal drugs, can withstand cold and wet ecological environment and resistance to all kinds of oils, in addition to good cable flexibility characteristics, with moisture-proof, anti-pressure and other characteristics.
2. The bending radius of the silicone electric hot wire exceeds 6 times the diameter of the cable, and the laying operating temperature is not less than 0 °C. Widely used in lighting equipment, electrical products, electric heating electrical products, instrument equipment, motor wiring and electronic devices, lighting fixtures, gas appliances and other high-temperature ecological environment. It is suitable for the application of the long-term allowable operating temperature of the cable line within the operating temperature range of +180 °C or less, and is used in the connection of intermediate electrical products for power generation capacity, metallurgical industry, chemical plant industrial production and other high line temperature ecological environment mobile electrical products
3. Silicone electric hot wire is another cable that uses thermoplastic polymer as an insulation sheath after rubber cable, but its characteristics are better than rubber cable wire, especially its corrosion resistance and heat resistance, far beyond rubber sheathed raw materials. Silicone electric hot wire is very suitable for all kinds of mobile places, motor wiring, etc. In fact: heat-resistant silicone rubber cable, silicone shielded twisted pair, silicone flat mobile cable, silicone flexible cable, silicone armored cable, silicone stainless steel wire armored cable, electroplated silicone shielded flexible cable, etc.
4. The surface of a good silicone electric hot wire should be round and smooth, and the coating should be continuous and uniform. The surface of the metal conductor must not have triangles, burrs, cracks, knots, wrinkles, debris, spots, black spots, mechanical equipment damage, etching spots and other defects. A good silicone electric hot wire color is uniform and bright, without excessive oxidation marks. Metal conductor cross-section specifications are sufficient, not insufficient. The insulation layer and the surface of the wire jacket of the silicone electric hot wire should be smooth and round, and the gloss should be uniform and even, and there should be no visible maculopapular rash, bubbles, burning paste, etc. The insulation layer (sheath) is thin and uniform, and does not have axial forces. No mechanical equipment damage and flattening condition, no mechanical equipment damage and flattening condition.
